這次手作了35 PCS課堂上使用，包括11月Maker Faire Taipei展覽樣品
和鎢絲燈泡一起打包過後，就像準備出貨，只是難看了點
工作桌凌亂不堪，但為了就是要學員一次就上手!
且準備了九支程式、電路圖說明與Layout走線，要在三小時完全學會
而且當天會有小鮮肉助教，把教材給他之後，我就可以喝飲料看漫畫了
希望之後完整系列課程結束，能讓大家多多關心自己家中的長輩 ^ ^
以下程式可以按下d、a、b調光
操作影片在這
int pinLed = 14;
int PWM = 9; // PWM pin
int dimming = 40; // Dimming level (0-128) 0 = ON, 128 = OFF
int flag1=0,flag2=0,flag3=0;
void setup(){
Serial.begin(9600);
pinMode(2, INPUT);
pinMode(pinLed, OUTPUT);
analogWrite(PWM, 55); //setting
PWM speed
Serial.println("Hello");
}
void loop(){
int switchStatus = digitalRead(2);
String s = "";
while (Serial.available()) {
char c = (char) Serial.read();
if(c!='\n')
{
s += c;
}
delay(1);
}
if(s=="d"){
flag1=1;
flag2=0;
flag3=0;
dimming=40;
Serial.println(s);
}
if(s=="a"){
flag2=1;
flag1=0;
flag3=0;
dimming=30;
Serial.println(s);
}
if(s=="b"){
flag3=1;
flag2=0;
flag1=0;
Serial.println(s);
}
if(switchStatus==HIGH && flag1==1)
{
Serial.println("ddd");
int
dimtime = (65*dimming); // For 60Hz
=>65
delayMicroseconds(dimtime); //
Wait till firing the TRIAC
digitalWrite(pinLed , HIGH); //
Fire the TRIAC
delayMicroseconds(8.33);
// triac On propogation delay
// (for 60Hz use 8.33) Some Triacs need a longer period
digitalWrite(pinLed, LOW); //
No longer trigger the TRIAC (the next zero crossing will swith it off) TRIAC
}
if(switchStatus==HIGH && flag2==1)
{
Serial.println("aaa");
int
dimtime = (65*dimming); // For 60Hz
=>65
delayMicroseconds(dimtime); //
Wait till firing the TRIAC
digitalWrite(pinLed , HIGH); //
Fire the TRIAC
delayMicroseconds(8.33);
// triac On propogation delay
// (for 60Hz use 8.33) Some Triacs need a longer period
digitalWrite(pinLed, LOW); //
No longer trigger the TRIAC (the next zero crossing will swith it off) TRIAC
}
if(switchStatus==HIGH && flag3==1)
{
Serial.println("bbb");
digitalWrite(pinLed, LOW); //
No longer trigger the TRIAC (the next zero crossing will swith it off) TRIAC
}
}
以下程式可做出AC呼吸燈泡模式
將%Localappdata%\Arduino15\packages\LinkIt\hardware\linkit_rtos\0.8.4\cores\arduino\wiring_interrupt.c
裡面的eint_config.debounce_time = 50; // debounce time unit: ms
50改為0
-->可以在C槽中找
將%Localappdata%\Arduino15\packages\LinkIt\hardware\linkit_rtos\0.8.4\cores\arduino\wiring_interrupt.c
裡面的eint_config.debounce_time = 50; // debounce time unit: ms
50改為0
-->可以在C槽中找
操作影片在這
int pinLed = 14; //output pin
int flag = 0;
int dimming = 128; // Dimming level (0-128) 0 = ON, 128 = OFF
int brightness = 40; // how bright the LED is
int fadeAmount = 1; // how many points to fade the LED by
void setup()
{
pinMode(pinLed, OUTPUT);
attachInterrupt(2, interrupt, RISING); //using
interrupt
Serial.begin(9600);
}
void loop()
{
if (flag == 1 )
{
// change the brightness for next time
through the loop:
brightness = brightness + fadeAmount;
dimming=brightness;
Serial.println(brightness);
int
dimtime = (65*dimming); // For 60Hz
=>65
delayMicroseconds(dimtime); //
Wait till firing the TRIAC
digitalWrite(pinLed, HIGH); //
Fire the TRIAC
delayMicroseconds(8.33);
// triac On propogation delay
// (for 60Hz use 8.33) Some Triacs need a longer period
digitalWrite(pinLed, LOW); //
No longer trigger the TRIAC (the next zero crossing will swith it off) TRIAC
// reverse the direction of the fading at the ends of the fade:
if
(brightness <= 10 || brightness >= 100)
{
fadeAmount = -fadeAmount;
}
flag = 0;
}
}
void interrupt()
{
flag
= 1;
}
這次是初階課程，如果控制30顆燈泡同時閃爍或亮滅，會挺壯觀
但可惜的是，MQTT要等到進階課程才會教到 ^ ^
加入我們吧!
